Production Process & Kneading Stage
Typical hot-melt adhesive (EVA / SBS / polyolefin) line: polymer melting → tackifier dissolution → antioxidant/additives → vacuum devolatilization → screw discharge to pelletizing/forming. The kneader owns the melting-compounding stage and acts as the "thermal history manager" of the line — blend uniformity determines tack and peel strength; heat exposure determines yellowing and odor.
Typical kneading sequence:
- Melting: polymer and waxes charged first, hot-oil jacket heated to 150-180 °C, low-speed kneading until fully molten;
- Tackifier in portions: rosin ester / hydrocarbon resin added batch by batch, each fully dissolved before the next;
- Additives: antioxidants (e.g. 1010/168) added after temperature stabilizes, below their decomposition point;
- Vacuum devolatilization: about -0.09 MPa to strip moisture and low-boilers, preventing bubbles and coating craters;
- Discharge: screw discharge directly to pelletizing or forming, insulated throughout to avoid solidification.
Key controls: temperature uniformity (local overheating causes yellowing, gel and odor), antioxidant dosing window, minimizing total heat history.
Material Characteristics → Equipment Requirements
| Material characteristic | Process impact | Equipment requirement |
|---|---|---|
| Hot melt (150-180 °C), solidifies on cooling | Dead legs freeze and plug | Hot-oil jacket, insulated discharge, cold-zone-free design |
| High melt viscosity with mineral fillers | Blade/cylinder wear | Hardfaced / wear-treated blades |
| Heat-sensitive resin & antioxidant | Decomposition, yellowing | Precise temperature control, low-shear mixing |
| Continuous production demand | Batch handshakes slow output | Screw discharge to extrusion line |
| Frequent color/grade changes | Color carry-over, hard cleaning | Hydraulic tilting discharge, quick-strip cleaning |
For hot-melt applications, select the kneader by temperature accuracy and insulated discharge design; screw discharge is the standard choice for continuous downstream forming.


