Application

Battery Slurry

Solid content & dispersion control, coating-grade

Battery Slurry

Cathode/anode slurry requires uniform dispersion of active material, conductive agent and binder. Kneaders with vacuum and high shear control solid content and dispersion uniformity to meet coating process requirements.

Production Process & Kneading Stage

Typical lithium-ion slurry (cathode NCM/LFP, anode graphite) line: dry blending of active material & conductive agent → binder solution preparation → kneading dispersion → vacuum deaeration → demagnetization/filtration → coating. The kneading stage determines solids uniformity and agglomeration state, hence coating density consistency and cell performance.

Typical kneading sequence:

  1. Dry blending: active material and conductive agent (e.g. SP) pre-blended at low speed to build the conductive network skeleton;
  2. Binder solution in steps: PVDF/NMP or aqueous CMC/SBR added gradually to avoid "sandwich" agglomerates;
  3. Kneading dispersion: solids raised to about 70%; the kneader provides macro mixing and shear, particle-level dispersion handled by upstream bead mills;
  4. Vacuum deaeration: above -0.095 MPa for 30-60 min — residual bubbles become pinholes in the coating;
  5. Discharge & demag: bottom/screw discharge through demagnetizer and vibrating screen to coating.

Key controls: metallic foreign matter (Fe/Cu at ppb level), slurry temperature (NMP evaporation, binder degradation), batch-to-batch solids/viscosity consistency.

Material Characteristics → Equipment Requirements

Material characteristicProcess impactEquipment requirement
High solids, viscosity thousands to tens of thousands mPa·sHeavy mixing load, hard wettingHigh-power drive, staged liquid addition
Zero tolerance for metal finesWear introduces magnetic fines316L or ceramic/non-metal wear coating, with demag
Extremely bubble-sensitiveEntrained air → coating pinholesHigh-vacuum deaeration, level/vacuum interlock
NMP volatile, aqueous pH-sensitiveComposition drift, binder failureSealed vessel, solvent recovery port
Strict batch consistencyParameter drift = batch variationVFD speed control, torque/temperature records

Think "clean, deaerated, traceable" — a battery slurry kneader is a grade above standard chemical models in material and sealing class.

Related Articles

Other Applications

Need process evaluation & selection?

Free material testing and process consulting - our engineers will recommend the right machine.

免费物料测试 24 小时响应 出口60+国家
Contact now