Application

Food & Pharma

GMP hygienic: 316L mirror polish + CIP cleaning

Food & Pharma

Gum base and pharmaceutical intermediates require hygienic contact parts (316L mirror-polished, Ra<=0.4um) and CIP cleaning, customizable to GMP requirements.

Production Process & Kneading Stage

Typical line for high-viscosity food & pharma materials (chewing-gum base, chocolate compound, ointments, gels): raw material pretreatment → kneading/mixing → vacuum deaeration/devolatilization → forming/filling. Mixing uniformity drives taste and dose uniformity; hygiene compliance is the entry ticket.

Typical kneading sequence:

  1. Batch charging: in formulation order (powders → syrups/fats → actives) — order affects wetting and agglomeration;
  2. Kneading: medium/low-speed intensive shearing with full temperature control to protect heat-sensitive actives (flavors, APIs, vitamins);
  3. Vacuum devolatilization: removes water, air and low-boilers (candy-base deaeration, ointment de-bubbling);
  4. CIP cleaning: between batches in place, with residue testing on product changeover;
  5. Residue-free discharge: straight to forming/filling with minimal heel.

Key controls: cross-contamination control and cleaning validation, temperature protection of actives, foreign-matter control, complete batch traceability.

Material Characteristics → Equipment Requirements

Material characteristicProcess impactEquipment requirement
GMP/FDA hygiene complianceDemanding material & surface specs316L, mirror polish Ra≤0.4 μm, hygienic seals
Heat-sensitive actives (flavors/APIs)Thermal degradationPrecise jacket temperature control, low-shear heat input
High viscosity, many bubblesHeavy load, hard deaerationIntensive blade set, vacuum deaeration
Frequent product changeoverCross-contamination riskCIP cleaning, dead-zone-free quick-strip design
Zero foreign-matter toleranceContamination = full batch scrapMetal-free wear design, food-grade seals, batch records

A food/pharma kneader is built to hygienic standards — material certificates, surface roughness reports and cleaning validation files are delivered with the machine.

Related Articles

Other Applications

Need process evaluation & selection?

Free material testing and process consulting - our engineers will recommend the right machine.

免费物料测试 24 小时响应 出口60+国家
Contact now